RockJock CE-9114NL-28 - Johnny Joint Rod End 2 1/2 Inch Narrow Forged 2.625 Inch X .640 Inch Ball 1 1/4 Inch-12 RH Threaded Shank Externally Greased 4X4
RockJock CE-9114NL-28 - Johnny Joint Rod End 2 1/2 Inch Narrow Forged 2.625 Inch X .640 Inch Ball 1 1/4 Inch-12 RH Threaded Shank Externally Greased 4X4

RockJock CE-9114NL-28 - Johnny Joint Rod End 2 1/2 Inch Narrow Forged 2.625 Inch X .640 Inch Ball 1 1/4 Inch-12 RH Threaded Shank Externally Greased 4X4

Write a Review
$83.59
$75.99
(You save $7.60 )
SKU: HWSH-CE-9114NL-28
UPC: 810038154985
Stock: 6
Vendor: Turn14 - CSR
SpecialOrder: True
CarbRejected: False
CouponIsOn: False
StockEta: N/A
ProfitMargin: 9.100
CostOfItem: 56.10
ItemPopularity: 0
MapPrice: 66.00
RetailPrice: 66.00
EbayAllowed: False
WarehouseStock: 6
ShippingGroups: ["Flatrate_Turn14"]
EbayPrice: 75.99
ShipperHq: {"shipping-groups":["Turn14","FreeShipping","Flatrate_Turn14"],"shipping-origins":[],"shipping-dimensional-rules":[]}
IsReturnable: True
EbayPriority: 0
Adding to cart… The item has been added
  • screenshot-2024-06-06-013938.png
RockJock CE-9114NL-28 - Johnny Joint Rod End 2 1/2 Inch Narrow Forged 2.625 Inch X .640 Inch Ball 1 1/4 Inch-12 RH Threaded Shank Externally Greased 4X4

RockJock CE-9114NL-28 - Johnny Joint Rod End 2 1/2 Inch Narrow Forged 2.625 Inch X .640 Inch Ball 1 1/4 Inch-12 RH Threaded Shank Externally Greased 4X4

$83.59
$75.99
(You save $7.60 )
Description  

RockJock - CE-9114NL-28

RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball.

The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring.

This specific joint is a 2 1/2 inch diameter, fitted with a zerk fitting for greasing, 2 1/4 inch of 1 1/4 inch-12 left hand threads on the shank, and a 2.625 inch mounting width offset ball with a .625 inch thru bolt hole. Finished in gold zinc plating.

Customers Also Viewed

!